Wood Beam LED Pendant Light No.1
Wood Beam LED Pendant Light No.1
This Wood Beam LED Pendant Light is an old-worldly composition of timber and steel contrasted with the clean modern look of embedded LEDs.
The steel work of our pendant is all hand fabricated, heat blackened and sealed with linseed oil which provides a beautifully antiqued and aged finish that is dry to the touch. The rustic Cypress wood has been through a four stain process and sealed with wipe on poly. A final light coat of wax is applied and polished. Each wooden beam will have the same colour tone but will be completely uniquely distressed. We have added a custom electro-etched boilerplate to this product to complete the vintage industrial look and feel. Two custom steel plates are provided to tether the pendant LED to the ceiling via chain and S hooks.
This light is perfectly suited for use in a multitude of environments. Due to the quality of light provided and warm tones of the wood, this would be ideal over a dining table, a bar counter, food service area, billiards or snooker table, passageway lighting or could be used in any environment that requires an authentic vintage look. The LED driver is recessed out of view into the top of the timber. It may also be suitable for use in areas where glass bulbs are not permitted and shatterproof requirements are in place.
This light comes with an overall drop height of 1500mm that can be adjusted shorter via the chain links. It can also be increased by using the options provided. The standard beam size is 90mm wide x 90mm high x 1200mm long. However, we can build these lights to other specific lengths or scale up to larger dimensions of timber, please contact us if you have an idea or require a custom build.
It comes wired and ready to install by your electrician. Mains power runs to one ceiling plate and the 1-10V dimmer connection runs up the other side. You may wish to use your own 1-10v dimmer or purchase one of ours here:
Please consult with your electrician for more information. All required lighting components come with either SAA, RCM for Australia and New Zealand, CE for Europe or UL listing for the US and Canada. This light is also available in kit form for you to finish in your own style. You can also purchase all of the components individually.
Please note this product is usually made to order. We endeavour to ship within 3 weeks after purchase but it may take up to 4 during busy periods. If delivery time is crucial to your project please contact us prior to ordering and we will do our best meet your needs.
Custom fabricated steel components.
Uniquely distressed vintage style wood.
Choice of fabric cable.
Custom boiler plate.
Installation Document click here
Indoor use only.
Input Voltage: 240VAC (eg. AUS, UK, NZ) or 120VAC (eg. US, CA).
Rated Wattage: 25W
LED Driver Wattage: 40W
LED: SMD strip. 12V -24V 30,000Hrs
Light Output: 2200lm
Colour Temperature: Optional
Colour Rendition Index: >80
Cool White - 6000k
Natural White - 4000k
Warm White - 3000k
There are three possible modes of dimming. The driver will automatically detect the mode used.
1. 0-10VDC Potentiometer Dimer
2. 10V PWM signal - frequency range 100Hz ~ 3KHz
3. Resistive - 100K Potentiometer. (Only suitable for dimming a single light fitting/driver.)
Drop Height: 1500mm Standard
Weight: Approximately 16kgs (33lbs)
Little Anvil is a duo of creative makers who come from opposite backgrounds and have formed an alliance through an appreciation of production, machining, techniques and tools. Both bring elements to the table and offer a perspective and skill set that the other learns and grows from. The constant drive to become better and be challenged is what makes the Anvil ring.
If our shipping quote seems incorrect, please contact us so we can try to accurately give you a figure based on your order quantity and location. Shipping within Australia varies greatly so the quote on our products is an average and may differ (higher or lower) based on your state. If you are an international purchaser and your country is not specified, please contact us and we will do our best to get you a price asap. International buyers: please be aware that you may be subject to import duties / taxes in your country.